Concrete Admixtures

    Concrete Admixture Picture 2.JPG (38839 bytes)  

Various climates and environmental conditions affect the setting times, cure rates and the performance of concrete, stucco and masonry coatings. Sider-Oxydro's concrete admixtures are simple and effective to help aid in the enhancement and performance of concrete mixes, stucco's and masonry coatings, resulting in higher continuous productivity and lowered labor cost.

A few of the featured benefits using Sider-Oxydro's concrete admixture products include:

blebul1d.gif (1048 bytes) Pre-Packaged
blebul1d.gif (1048 bytes) Easy-To-Use
blebul1d.gif (1048 bytes) Continued Application During Seasonal Changes

 

Sider-Oxydro is pleased to introduce our Concrete Admixtures: 

You will need Adobe® Reader® to open the PDF Specs

Get Adobe Reader

blebul1d.gif (1048 bytes)  Temperature Applications:

Oxy-Cold - A non-chloride based, ready-to-use, Stucco, Mortars & Concrete admixture designed to allow application and concrete placement in cold weather environments (down to 17.6º F or -8º C).

Oxy-Heat - A non-chloride based, ready-to-use, Stucco, Mortars & Concrete admixture designed to allow application and concrete placement in elevated temperatures environment.

Oxy-Rapid - Especially formulated for use in cold weather environments to aid pre-cast concrete in increasing the set time by increasing the evaporation rate of the water in the mix while maintaining the resistant properties of the finished concrete.

Oxy-Cure - Our ready-to-use, organic resin based concrete sprayed-topcoat designed for use to prevent rapid evaporation of water from the concrete mix due to ambient conditions such as strong winds, rain etc... 

blebul1d.gif (1048 bytes)  Properties Applications:

Oxy-Fluid  - Designed for use in ready-mix concrete by enhancing the fluidity characteristics and increasing the plasticity of the concrete mix while at the same time, reducing the need for water in the concrete mix.

Oxy-Plast - Our chloride free admixture that produces a concrete with a lower water to cement ratio and yields greater plasticity with slight initial set retarding properties.

Oxy-Plastair - A ready-to-use, air-entraining & plasticizing admixture for concrete featuring the benefits of plasticity & waterproofing functionality.

 

 

Text and images used in this website are provided for information purposes only. THIS IS NOT A SPECIFICATION! While every effort has been made to be comprehensive and accurate, the publisher cannot accept any liability for omissions or errors. Users should contact Sider-Oxydro, Inc. for the product(s) referred  to in this website to ensure that any information used to make decisions about the product(s) is as up-to-date and complete as possible.

Text and images contained in this website and its links are considered property of Sider-Oxydro, Inc. and may not used or reproduced without the express written consent of Sider-Oxydro, Inc. and as well without the reference name:' Sider-Oxydro, Inc'.